MEAN WELL LCM-40DA
search
  • MEAN WELL LCM-40DA

AC-DC MULTI-STAGE DIMMABLE with DALI LED DRIVER - CONSTANT CURRENT - 40 W - SELECTABLE OUTPUT CURRENT WITH PFC

€49.95
Tax included
10 pieces available

AC-DC MULTI-STAGE DIMMABLE with DALI LED DRIVER - CONSTANT CURRENT - 40 W - SELECTABLE OUTPUT CURRENT WITH PFC
  • plastic housing with class II design
  • built-in active PFC function
  • standby power consumption < 0.5 W
    • DALI interface (logarithm or linear dimming curve selectable)
    • push dimming
    • synchronization up to 10 units
  • current level selectable via DIP switch
Quantity

Specifications

Product basic info
Primary colours Grey
Additional colours Blue
Depth unit 12.35 cm
Height unit 2.3 cm
Width unit 8.15 cm
Weight unit 240 g
Material Plastic + PS/LED

 

Electrical data
Standby power consumption 0.5 W
Environment specifications
  • operating temperature: -30 to +90 °C
  • max. case temperature: +90 °C
  • operating humidity: 20-90 % RH non-condensing
  • storage temperature, humidity: -40 to +80 °C, 10-95 % RH
  • temperature coefficient: ± 0.03 %/°C (0-50 °C)
  • vibration: 10-500 Hz, 2G 10 min/1cycle, period for 60 min each along X, Y, Z axes
Functionality specifications
  • temperature compensation: by external NTC thermistor (not provided with the power supply)
  • dimming
  • synchronization
Input specifications
  • voltage range: 180-295 VAC 254-417 VDC
  • frequency range: 47-63 Hz
  • power factor (typ.): >= 0.975 / 230 VAC; >= 0.96 / 277 VAC at full load
  • total harmonic distortion: lower than 20 % when output load is 75 % or higher
  • efficiency (typ.): 91 %
  • AC current (typ.): 0.23 A / 230 VAC; 0.2 A / 277 VAC
  • inrush current (typ.): cold start 20 A (twidth = 260 µs measured at 50 % Ipeak) at 230 VAC
  • leakage current: < 0.5 mA / 240 VAC
  • standby power consumtion: < 0.5 W for Blank-Type, < 1.2 W for AUX-Type
Mean time between failures (MTBF) MTBF: 193.6K hrs min. MIL-HDBK-217F (25 °C)
Protection specifications
  • short circuit: constant current limiting, recovers automatically after fault condition is removed
  • overvoltage:
    • 110-130 V
    • protection type: shut down output voltage, re-power on to recover
  • over-temperature: shut down output voltage, re-power on to recover
Safety and EMC specifications
  • safety standards: UL8750, CSA C22.2 No.250.13-12, ENEC EN61347-1, EN61347-2-13, EN62384 independent approved, GB 19510.1, BIS IS15885, EAC TP TC 004 approved
  • DALI standards: comply with IEC62386-101, 102, 207
  • withstand voltage: input to output: 3.75 kVAC
  • isolation resistance: input to output: > 100 Mohm / 500 VDC / 25 °C / 70 % RH
  • EMC emission: compliance to EN55015, EN61000-3-2 Class C (>= 40 % rated power); EN61000-3-3, GB17625.1, GB17743, EAC TP TC 020
  • EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11, EN61547 light industry level (surge 2 kV), EAC TP TC 020

 

Technical data
Power rating 40 W
Dimmable
Output specifications
  • selectable current: 350 mA / 500 mA / 600 mA / 700 mA / 900 mA / 1050 mA
  • DC voltage range: 2-100 V / 2-80 V / 2-67 V / 2-57 V / 2-45 V / 2-40 V
  • rated power: 42 W
  • open circuit voltage: 110 V
  • current ripple: ± 5.0 % max. at rated current
  • current tolerance: ± 5 %
  • auxiliary DC output: nominal 12 V (deviation 11.4 ~ 12.6 V) at 50 mA for AUX-Type only
  • setup time: 500 ms / 230 VAC
Selectable current

 

Set-up options
Dimming type Push dimming

 

Environmental data
Usage location Indoor only

 

Operational properties
Power factor correction function (PFC)

 

IT connections
Interface type Build-in dali

Bar code

  • Bar code (EAN-13):4711287461359

Extra information

  • Country of origin :CN

Packaging information

  • Type of packaging:Box (Carton)
  • Dimensions of the packaging (W x H x D):16 x 9 x 3cm
  • Weight of the item + packaging:246 g
LCM-40DA

Specific References

EAN13
4711287461359
New

10 other products in the same category: